Odisha, India
Carbon Segmented Rings Manufacturer in Angul
Carbon segmented rings for Angul captive power turbines.

Carbon Segmented Rings Manufacturer in Angul
The supplier captive power plants at Angul use steam turbines whose gland rings wear, and engineers want is a carbon segmented rings manufacturer in Angul. Carbon segmented rings from Dmaic Carbon are made arc by arc to your groove size, with new garter springs in the set.
In Service Around Angul
Fit rings at overhaul so gland leakage stays low.
Send groove and shaft sizes, pressure and temperature. Fit the arcs in the order they were lapped and keep the joints staggered, so that leakage paths do not line up. The garter spring should pull the arcs lightly onto the shaft; an over-tight spring heats the shaft and wears the carbon fast. Rotate the ring set so that the joints are not in line with one another when fitted. After fitting, bring the turbine up to temperature slowly so that the arcs bed in without overheating.
Getting Parts to Angul
Our quotations for Angul state the grade, the finish and the lead time. Dispatch likewise covers Talcher, Jharsuguda and Cuttack. See also: Ceramic Seal Rings and Ceramic Bushes.
Frequently Asked Questions
Can you supply large turbine rings?
Yes, to groove size.
Send Your Requirement
Share the drawing or a sample, the operating medium, temperature, speed and quantity. Our engineers review it and reply with a grade recommendation and a quotation.




