Skip to Content

Advanced Ceramic and Carbide Components

Tungsten Carbide Rings and Bushes

Tungsten carbide rings, bushes and seal faces for high pressure, abrasive and heavy wear duty.

Request QuoteWhatsApp

Tungsten Carbide Rings and Bushes
Specifications
ProductTungsten Carbide Rings and Bushes
FamilyAdvanced Ceramic and Carbide Components
SuppliedTo your drawing, sample or application
GradeChosen from the Dmaic grade chart after duty review
Quote needsDrawing or sample, medium, temperature, speed, load, quantity

What it Is

Tungsten carbide is a hard, tough cemented carbide. It is used for seal faces, bushes and sleeves where pressure is high and solid particles are present.

What You Gain

  • Very hard and tougher than most ceramics
  • Handles high face pressure
  • Resists abrasion in slurries
  • Nickel and cobalt binders
  • Pairs with carbon graphite faces

Where it is Used

  • High-pressure pump seals
  • Slurry and mining pumps
  • Oil and gas equipment
  • Descaling and boiler feed pumps
  • Shaft sleeves and bushes
  • Heavy wear parts

Materials and Grades

Binder type affects corrosion resistance. Tell us the fluid and we advise between nickel-bonded and cobalt-bonded grades.

Made to Your Drawing

Send the drawing, the duty and the mating material. We confirm feasibility before quoting. For a useful review, send a drawing or sample with the operating temperature, medium, pressure, speed, load, mating material, tolerance and yearly quantity. The reference values are for guidance, and the final grade is confirmed against your complete operating conditions.

Frequently Asked Questions

When is tungsten carbide better than silicon carbide?

Where pressure is high and shock or solids are present, because it is tougher. Silicon carbide is better in many strong chemicals.

Can you supply a matching carbon ring?

Yes, as a pair.

What binder should I choose?

It depends on the fluid. Nickel binders resist corrosion better in many chemicals.

Request a Quote for Tungsten Carbide Rings and Bushes

Share the drawing or a sample, the operating medium, temperature, speed and quantity. Our engineers review it and reply with a grade recommendation and a quotation.