Skip to Content

Mechanical Carbon Products

Carbon Radial Bearings

Carbon graphite radial bearings and bush bearings for media-lubricated, submerged and corrosive rotating equipment.

Request QuoteWhatsApp

Carbon Radial Bearings
Specifications
ProductCarbon Radial Bearings
FamilyMechanical Carbon Products
SuppliedTo your drawing, sample or application
GradeChosen from the Dmaic grade chart after duty review
Quote needsDrawing or sample, medium, temperature, speed, load, quantity

What it Is

A radial bearing supports a rotating shaft across its diameter. Carbon graphite bushes work in water, chemicals and hot fluids where a metal bush would corrode, seize or need oil.

What You Gain

  • Runs on the pumped liquid as its own lubricant
  • Tolerates short dry-running periods
  • Resists corrosion in many process fluids
  • Plain, flanged and grooved bore forms
  • Machined to the fit your shaft needs

Where it is Used

  • Submersible and vertical turbine pumps
  • Boiler feed and process pumps
  • Marine and offshore machinery
  • Food and beverage equipment
  • Dryers and calenders
  • Vacuum and gas handling equipment

Materials and Grades

Resin-impregnated grades are the usual choice for pumps handling clean liquids. Where the temperature or load is higher, antimony, copper or bronze-impregnated grades from the grade chart can be considered.

Made to Your Drawing

Send the shaft size, the housing size, the length and the running conditions. We machine bushes with oil grooves, flanges, keyways or split forms as your design needs. For a useful review, send a drawing or sample with the operating temperature, medium, pressure, speed, load, mating material, tolerance and yearly quantity. The reference values are for guidance, and the final grade is confirmed against your complete operating conditions.

Frequently Asked Questions

Why use carbon instead of a metal bush?

Carbon graphite does not need oil or grease, does not corrode in many fluids and is forgiving when the lubricating film is lost for a short time.

Do you supply bushes as well as bearings?

Yes. Plain bushes, flanged bushes and bush bearings are all made to your drawing.

What do you need to quote?

The bore, the outside diameter, the length, the fluid, the temperature, the speed and the shaft material.

Request a Quote for Carbon Radial Bearings

Share the drawing or a sample, the operating medium, temperature, speed and quantity. Our engineers review it and reply with a grade recommendation and a quotation.