Skip to Content

Mechanical Carbon Products

Carbon Segmented Rings

Matched multi-segment carbon graphite sealing rings for rotating and oscillating equipment, in resin or metal-impregnated grades.

Request QuoteWhatsApp

Carbon Segmented Rings
Specifications
ProductCarbon Segmented Rings
FamilyMechanical Carbon Products
SuppliedTo your drawing, sample or application
GradeChosen from the Dmaic grade chart after duty review
Quote needsDrawing or sample, medium, temperature, speed, load, quantity

What it Is

A segmented ring is a sealing ring cut into matched arcs held together by a garter spring. The segments wear in against the shaft and keep sealing as they wear.

What You Gain

  • Seals around a shaft without rigid contact
  • Wear is taken up by the spring
  • Works without lubricant in suitable grades
  • Segments supplied as a matched set
  • Made in the number of segments your seal housing uses

Where it is Used

  • Steam and gas turbines
  • Compressors
  • Blowers and fans
  • Rotating shaft seals in process plant
  • Oscillating mechanisms
  • Gland seals

Materials and Grades

Resin-impregnated grades are used for moderate temperatures. Metal-impregnated grades, such as the antimony, bronze and nickel grades on the grade chart, are considered for hotter duty.

Made to Your Drawing

Tell us the shaft diameter, the housing, the number of segments and the spring type. We make the segments as a matched set to your drawing. For a useful review, send a drawing or sample with the operating temperature, medium, pressure, speed, load, mating material, tolerance and yearly quantity. The reference values are for guidance, and the final grade is confirmed against your complete operating conditions.

Frequently Asked Questions

How many segments does a ring have?

That depends on your seal design. We make three, four and other segment counts to the drawing.

Are the segments interchangeable?

No. Segments are made and marked as a matched set and should be fitted together.

Can you match an existing ring?

Yes, from the old ring or a drawing, after we check the geometry and duty.

Request a Quote for Carbon Segmented Rings

Share the drawing or a sample, the operating medium, temperature, speed and quantity. Our engineers review it and reply with a grade recommendation and a quotation.