Skip to Content

Carbon Graphite Impregnation

Resin and metal impregnation for sealing, strength and heat, chosen for your medium and duty.

Why Impregnate Carbon Graphite?

Carbon graphite is porous as it is baked. Impregnation fills the pores with resin or with a metal. It can reduce permeability so a ring seals better, raise strength or hardness, change the heat limit and improve wear in a given medium. The right choice depends on the chemistry, the temperature, the mating surface, the pressure and the shape of the part.

Resin Impregnation

Phenolic, synthetic and epoxy-based resin systems, and other organic or inorganic compounds, can be used subject to the application. Resin is the usual route for seal rings and bearings that need low permeability and moderate temperature. The Dmaic grades DC-3105 and DC-3106 (alkali-proof) are resin grades.

Metal Impregnation

Copper, antimony, lead, bronze, nickel, copper and tin, and babbitt are used where more strength, a higher load or a higher temperature is needed. The Dmaic grades DC-3108 to DC-3114 are metal-impregnated. See the values on the grade chart.

What We Need to Recommend One

  • The operating medium and its concentration
  • Minimum and maximum temperature
  • Pressure, load and speed
  • Dry running or lubricated duty
  • The mating material and its surface finish
  • Drawing, tolerances and yearly quantity

Send these through the enquiry form and we will review them.

Send Your Requirement

Share the drawing or a sample, the operating medium, temperature, speed and quantity. Our engineers review it and reply with a grade recommendation and a quotation.