Skip to Content

Gujarat, India

Carbon Thrust Bearings Manufacturer in Bhavnagar

Carbon thrust bearings for Bhavnagar brine and seawater pumps.

Request QuoteWhatsApp

Carbon Thrust Bearings

Carbon Thrust Bearings Manufacturer in Bhavnagar

When parts wear out, vertical pumps lifting brine and seawater in salt works and chemical units hang on thrust faces, and engineers turn to a carbon thrust bearings manufacturer in Bhavnagar. Carbon thrust bearings are pressed and finished at Dmaic Carbon with the pad pattern, thickness and bore you specify.

In Service Around Bhavnagar

Carbon survives brine without corroding, where bronze washers pit within a season.

Send the loaded diameter and speed. A thrust washer that has worn only on one side points to a shaft that is not square to the housing, and the cause should be corrected. A ring that has worn tapered points to an out-of-square collar, and the collar face should be corrected. Thrust rings need a way for liquid or air to reach the pad faces, which is why grooves are cut in them; do not run one with the grooves blocked.

Getting Parts to Bhavnagar

Share your Bhavnagar requirement as a drawing or sample and we reply with a grade and a quotation, and we also reach Sihor, Alang and Talaja. You may also need: Carbon Vanes and Carbon Radial Bearings.

Frequently Asked Questions

Does brine harm carbon thrust bearings?

No, with a corrosion-resistant collar.

Send Your Requirement

Share the drawing or a sample, the operating medium, temperature, speed and quantity. Our engineers review it and reply with a grade recommendation and a quotation.