Skip to Content

Tamil Nadu, India

Carbon Radial Bearings Manufacturer in Coimbatore

Oil-free carbon radial bearings for Coimbatore textile machines, dryers and process equipment.

Request QuoteWhatsApp

Carbon Radial Bearings

Carbon Radial Bearings Manufacturer in Coimbatore

Wet grinders, textile machines and foundry equipment made in and around Coimbatore often carry shafts in places where grease will not stay, which is when design offices need a carbon radial bearings manufacturer in Coimbatore they can reach directly. Radial carbon bearings, plain or flanged, are finished by Dmaic Carbon to the bore, outside diameter and length you give us.

Where Coimbatore Plants Use Carbon Radial Bearings

A carbon bush runs on a dry graphite film, so a dryer-roll journal at 120 degrees or a washdown shaft in a food unit does not wash or bake the lubricant away. The housing fit is the part that matters, and we mark the press-fit allowance on the drawing so the bush is not cracked when it goes in.

Machine builders near Singanallur and Saravanampatti usually need small lots first, then repeats by the hundred. Tell us the speed, load, temperature and any water or steam at the shaft, and we select the carbon and the running clearance.

Quotation for Coimbatore

Describe the machine in Coimbatore, the failure and the working temperature, and we propose the part; Erode, Salem and Karur receive the same service. Also supplied: Synthetic Graphite Rods and Carbon Stoker Bushes.

Frequently Asked Questions

How is the press fit of a carbon bush decided?

It depends on housing material and temperature; we mark the interference on the drawing and advise on any retaining pin.

Send Your Requirement

Share the drawing or a sample, the operating medium, temperature, speed and quantity. Our engineers review it and reply with a grade recommendation and a quotation.