Skip to Content

Gujarat, India

Tungsten Carbide Rings and Bushes Manufacturer in Dahej

Tough tungsten carbide rings and bushes for Dahej high-pressure and seawater pumps.

Request QuoteWhatsApp

Tungsten Carbide Rings and Bushes

Tungsten Carbide Rings and Bushes Manufacturer in Dahej

High-pressure pumps and hydraulic tools used by Dahej's plants and fabrication yards wear small parts fast, and buyers ask a tungsten carbide rings manufacturer in Dahej. We grind and lap tungsten carbide rings, bushes and sleeves to drawing, with cobalt or nickel binder as the duty requires.

Tungsten Carbide Rings and Bushes in Dahej: Where They Run

Port and plant contractors at Dahej use tungsten carbide for sleeves and bushes in high-pressure pumps that pass seawater or process brine, since chloride-resistant nickel binder survives where a steel sleeve pits.

When ordering a sleeve, give the shaft diameter and the bore tolerance you need, since carbide cannot be adjusted after fitting. A tungsten carbide face running against carbon will outlast one running against itself in dry or poorly lubricated duty.

Sending Your Requirement from Dahej

Share your Dahej requirement by message, with the sample photographed beside a scale, and we reply with a grade and a price; the same holds for Bharuch, Vilayat and Surat. You may also need: Carbon Vanes and Synthetic Graphite Rods.

Frequently Asked Questions

Which binder for seawater duty?

Nickel binder is usual; send the pump details for a firm choice.

Send Your Requirement

Share the drawing or a sample, the operating medium, temperature, speed and quantity. Our engineers review it and reply with a grade recommendation and a quotation.