Skip to Content

Jharkhand, India

Carbon Segmented Rings Manufacturer in Dhanbad

Carbon segmented rings for Dhanbad boiler-house turbines.

Request QuoteWhatsApp

Carbon Segmented Rings

Carbon Segmented Rings Manufacturer in Dhanbad

Captive power and boiler houses use gland rings, and engineers here ask for a carbon segmented rings manufacturer in Dhanbad. Dmaic Carbon supplies carbon arcs and garter springs as a matched set for your gland groove.

How Carbon Segmented Rings Are Used in Dhanbad

At the Mejia and Chandrapura power houses, steam turbine glands are renewed at annual outages, and coal-field maintenance gangs want rings ready beforehand.

Send groove and shaft diameters with the gland pressure. A ring that has worn only on one side indicates the shaft is running off-centre, and bearings should be inspected. The garter spring should pull the arcs lightly onto the shaft; an over-tight spring heats the shaft and wears the carbon fast. Describe the leakage you see, whether at the gland or along the shaft, since it helps us tell wear from damage.

Ordering from Dhanbad

Tell us what has worn out in Dhanbad and what it runs against, and the quotation follows; we also supply Bokaro, Sindri and Asansol. Related parts: Carbon Blocks and Synthetic Graphite Rods.

Frequently Asked Questions

Sizes?

Send them.

Send Your Requirement

Share the drawing or a sample, the operating medium, temperature, speed and quantity. Our engineers review it and reply with a grade recommendation and a quotation.