West Bengal, India
Carbon Seal Rings Manufacturer in Durgapur
Lapped carbon seal rings for Durgapur steel, power-station and foundry pumps.

Carbon Seal Rings Manufacturer in Durgapur
Durgapur's economy is built on a steel plant, thermal power stations, alloy foundries and the coal belt around Asansol, and every one of them circulates water, condensate and ash slurry through pumps. When a mechanical seal fails, maintenance planners look for a carbon seal rings manufacturer in Durgapur who can match the ring and name the right partner face. Our carbon seal rings come in resin-bonded, antimony and impregnated grades, with the drive slot, step and height copied from the part you send.
In Service Around Durgapur
Power-station condensate near the Damodar runs hot and clean, and it flashes if the pressure drops, which is what blisters a poorly chosen carbon. An impregnated grade holds up. Ash-water in the same belt is the opposite problem, abrasive and not hot, and there the answer lies in a silicon carbide partner.
When a ring is replaced, the partner face is looked at too. Many early failures in this belt trace back to a worn partner that was kept while the carbon was renewed.
Getting Parts to Durgapur
If you are in Durgapur, a photograph and the operating figures can be enough to begin, and the same applies to Asansol, Raniganj and Bardhaman. See also: Carbon Rotors and Carbon Vanes.
Frequently Asked Questions
Can you suggest a grade for power-station condensate pumps?
Yes; give the temperature and pressure and we recommend an impregnated carbon and the counter-face to run against.
Send Your Requirement
Share the drawing or a sample, the operating medium, temperature, speed and quantity. Our engineers review it and reply with a grade recommendation and a quotation.




