Skip to Content

Madhya Pradesh, India

Tungsten Carbide Rings and Bushes Manufacturer in Indore

Tough tungsten carbide rings and bushes for Indore and Pithampur press and hydraulic shops.

Request QuoteWhatsApp

Tungsten Carbide Rings and Bushes

Tungsten Carbide Rings and Bushes Manufacturer in Indore

Auto-component press shops and hydraulic fitters in Pithampur and Indore need wear parts that hold their size, and they look for a tungsten carbide rings manufacturer in Indore. Our tungsten carbide rings, bushes and sleeves are made in cobalt or nickel binder and ground to your drawing.

Typical Duty in Indore

The material stays flat under load and resists abrasion without chipping, which is why it is used for guide bushes, throttle sleeves and seal faces.

Share pressure, liquid and mating material and we choose binder and finish. Mention the hardness you need if you have a specification; the binder content changes both hardness and toughness.

Start an Order in Indore

Buyers in Indore usually start with a sample and a question about grade. Plants in Pithampur, Dewas and Ratlam do the same. Often ordered with this: Carbon Vanes and Carbon Radial Bearings.

Frequently Asked Questions

Can you grind tungsten carbide to a tight tolerance?

Yes, ground and lapped to your drawing tolerance.

Send Your Requirement

Share the drawing or a sample, the operating medium, temperature, speed and quantity. Our engineers review it and reply with a grade recommendation and a quotation.