Skip to Content

Gujarat, India

Carbon Radial Bearings Manufacturer in Morbi

High-temperature carbon radial bearings for Morbi kiln cars, rollers and tile-press lines.

Request QuoteWhatsApp

Carbon Radial Bearings

Carbon Radial Bearings Manufacturer in Morbi

When parts wear out, kiln cars, roller conveyors and press feeders in tile plants work in heat and fine clay dust, and builders turn to a carbon radial bearings manufacturer in Morbi. Dmaic Carbon turns plain and flanged carbon bearings to the bore, outside diameter and length you specify.

Where Morbi Plants Use Carbon Radial Bearings

Clay dust turns grease into an abrasive paste that wears a bearing in weeks, while a dry carbon bush has no lubricant for dust to mix with. In the cooler zones of a roller kiln the same bush carries idler shafts.

State the roller diameter, load and the temperature at the shaft. A bush with polished, even wear along its length is healthy; wear concentrated at one end points to misalignment.

Quotation for Morbi

From Morbi, a repeat order needs only the earlier part number or date, while a first order needs a sample. Rajkot, Halvad and Maliya are served similarly. See also: Carbon Blanks and Synthetic Graphite Rods.

Frequently Asked Questions

Can carbon bushes be used on kiln-car wheels?

Yes, on many designs; send the temperature and wheel load.

Send Your Requirement

Share the drawing or a sample, the operating medium, temperature, speed and quantity. Our engineers review it and reply with a grade recommendation and a quotation.