Skip to Content

Maharashtra, India

Carbon Segmented Rings Manufacturer in Mumbai

Spring-held carbon segmented rings for steam and gas glands in Chembur and Trombay plants.

Request QuoteWhatsApp

Carbon Segmented Rings

Carbon Segmented Rings Manufacturer in Mumbai

Chembur and Trombay run steam and gas through turbines and compressors every hour of the day, and their maintenance stores search for a carbon segmented rings manufacturer in Mumbai when a gland ring wears out. Dmaic Carbon supplies carbon arcs and garter springs as a matched set for your gland groove.

Selecting the Grade for Mumbai

Three or four carbon arcs sit in a groove around the shaft, held in by a garter spring, and the joints between them are lapped so that steam cannot pass. As the carbon wears the spring closes the gap, so leakage stays low until the ring is nearly gone.

We copy rings from a worn sample for boiler feed pump turbines, forced-draught fans and process compressors in the Mumbai belt. Send the shaft size, groove width, pressure and temperature, and we propose the arc count and carbon grade.

How to Order in Mumbai

Post or courier the sample from Mumbai, add the duty in a line or two, and we return a quotation; Thane, Taloja and Pune are served alike. Related parts: Carbon Blocks and Carbon Radial Bearings.

Frequently Asked Questions

How many arcs should a segmented ring have?

Three or four arcs are common in the sizes used on Mumbai plant turbines; larger shafts may need more. We follow the old ring or your drawing.

Send Your Requirement

Share the drawing or a sample, the operating medium, temperature, speed and quantity. Our engineers review it and reply with a grade recommendation and a quotation.