Andhra Pradesh, India
Carbon Segmented Rings Manufacturer in Nellore
Carbon segmented rings for Nellore-area power turbines.

Carbon Segmented Rings Manufacturer in Nellore
Thermal stations near Muthukur use turbine gland rings, and engineers look for a carbon segmented rings manufacturer in Nellore. Our segmented rings are lapped at each joint and supplied with garter springs, made to the groove and shaft you specify.
What Nellore Buyers Ask For
At Muthukur, turbine glands run with steam that carries traces of moisture after long part-load running, which accelerates ring wear at the lower arcs.
Measure the groove and shaft diameters and give the gland steam pressure. Rotate the ring set so that the joints are not in line with one another when fitted. Check the groove sides as well as the bottom; a bell-mouthed groove lets the arcs tilt and leak. Describe the leakage you see, whether at the gland or along the shaft, since it helps us tell wear from damage.
Enquiries from Nellore
Working conditions, sizes and quantity are what we ask Nellore buyers for; samples help. We also cover Krishnapatnam, Kavali and Tirupati. Related parts: Carbon Stoker Bushes and Silicon Carbide Rings and Bushes.
Frequently Asked Questions
Large sizes?
Yes; send the details and we will confirm the fit.
Send Your Requirement
Share the drawing or a sample, the operating medium, temperature, speed and quantity. Our engineers review it and reply with a grade recommendation and a quotation.




