Skip to Content

Tamil Nadu, India

Tungsten Carbide Rings and Bushes Manufacturer in Neyveli

Tungsten carbide rings and bushes for Neyveli mining equipment.

Request QuoteWhatsApp

Tungsten Carbide Rings and Bushes

Tungsten Carbide Rings and Bushes Manufacturer in Neyveli

When parts wear out, mining equipment needs hard wear parts, and buyers turn to a tungsten carbide rings and bushes manufacturer in Neyveli. Our tungsten carbide parts are made in cobalt or nickel-bound grades and finished to the drawing tolerance you specify.

In Service Around Neyveli

Excavator and crusher wear parts at the lignite mines are made from tungsten carbide where abrasion is highest.

Send the drawing or a worn part. If a sleeve will be pressed on a shaft, give the shaft tolerance so that the interference can be set. Specify the tolerance on the bore and the outside diameter separately; the usual mistake is to ask for the same close tolerance on both and pay for it twice. A carbide sleeve fitted on a shaft needs an O-ring or sealant at the inside end, otherwise liquid creeps under it and corrodes the steel shaft beneath.

Getting Parts to Neyveli

Share your Neyveli requirement as a drawing or sample and we reply with a grade and a quotation, and we also reach Cuddalore, Chidambaram and Puducherry. Related parts: Carbon Radial Bearings and Carbon Steam Joint Rings.

Frequently Asked Questions

Mining parts?

Yes; send the details and we will confirm the fit.

Send Your Requirement

Share the drawing or a sample, the operating medium, temperature, speed and quantity. Our engineers review it and reply with a grade recommendation and a quotation.