Skip to Content

Telangana, India

Tungsten Carbide Rings and Bushes Manufacturer in Patancheru

Tough tungsten carbide rings and bushes for Patancheru high-pressure and homogeniser pumps.

Request QuoteWhatsApp

Tungsten Carbide Rings and Bushes

Tungsten Carbide Rings and Bushes Manufacturer in Patancheru

High-pressure feed pumps and homogenisers at Patancheru's plants wear small parts under pressure and solids, and buyers look for a tungsten carbide rings manufacturer in Patancheru. Our tungsten carbide rings, bushes and sleeves are made in cobalt or nickel binder and ground to your drawing.

What Patancheru Buyers Ask For

High-pressure homogenisers and feed pumps use hard bushes and valve seats that wear with suspended solids. Tungsten carbide is the standard material, and nickel binder is chosen for corrosive streams.

Share the pressure, the liquid and the part drawing. Avoid thin sections in the design; a wall that is too thin will crack under assembly stress. Nickel-bound carbide is slightly softer than cobalt-bound but resists corrosion much better.

Enquiries from Patancheru

Bring the drawing, the sample or only the problem from Patancheru. We also dispatch to Sangareddy, Hyderabad and Zaheerabad. Often ordered with this: Carbon Vanes and Ceramic Bushes.

Frequently Asked Questions

Can you supply valve seats?

Yes, to your drawing.

Send Your Requirement

Share the drawing or a sample, the operating medium, temperature, speed and quantity. Our engineers review it and reply with a grade recommendation and a quotation.