Skip to Content

Gujarat, India

Carbon Vanes Manufacturer in Surat

Carbon vanes for dry vacuum pumps serviced in Surat.

Request QuoteWhatsApp

Carbon Vanes

Carbon Vanes Manufacturer in Surat

When a vacuum pump in a Surat textile or printing unit loses suction, a worn vane set is usually the cause, and a carbon vanes manufacturer in Surat supplies the replacement. We make carbon vanes to your pump's slot dimensions, a full set at a time, from graphite blocks.

Carbon Vanes in Surat: Where They Run

Vanes seal the rotor slot to the housing and wear in place of the casing. Carbon needs no oil, so the exhaust stays clean for sensitive fabric and film.

Send an old vane or the size and pump make. State the pump make, model and number of vanes if you know them, and send one old vane if you can.

Sending Your Requirement from Surat

Share your Surat requirement by message, with the sample photographed beside a scale, and we reply with a grade and a price; the same holds for Bharuch, Vapi and Ankleshwar. You may also need: Carbon Radial Bearings and Silicon Carbide Rings and Bushes.

Frequently Asked Questions

Should I replace vanes before they are completely worn?

Yes, change them once they reach the wear limit set by the pump maker, before the rotor or housing is damaged.

Send Your Requirement

Share the drawing or a sample, the operating medium, temperature, speed and quantity. Our engineers review it and reply with a grade recommendation and a quotation.