Maharashtra, India
Tungsten Carbide Rings and Bushes Manufacturer in Taloja
Tungsten carbide rings and bushes for Taloja chemical equipment.

Tungsten Carbide Rings and Bushes Manufacturer in Taloja
Chemical metering and filter-press equipment uses bushes that hold their bore, and buyers look for a tungsten carbide rings and bushes manufacturer in Taloja. Tungsten carbide rings, bushes and sleeves from Dmaic Carbon are ground to tolerance in the binder suited to your duty.
Tungsten Carbide Rings and Bushes in Taloja: Where They Run
Nickel binder is preferred in acid and corrosive service.
Share the drawing and the liquid. Cobalt binder gives the best toughness and hardness, while nickel binder resists corrosion better; tell us the liquid so we can choose. Carbide is brittle in tension, so a shrink-fit insert should be designed to keep the carbide in compression. Avoid sharp internal corners in the drawing; a small radius greatly reduces the risk of cracking. When ordering a sleeve, give the shaft diameter and the bore tolerance you need, since carbide cannot be adjusted after fitting.
Sending Your Requirement from Taloja
Send the sample or sketch from Taloja together with the operating details; dispatch also goes to Panvel, Navi Mumbai and Raigad. See also: Carbon Radial Bearings and Carbon Steam Joint Rings.
Frequently Asked Questions
Which binder for acids?
Nickel binder.
Send Your Requirement
Share the drawing or a sample, the operating medium, temperature, speed and quantity. Our engineers review it and reply with a grade recommendation and a quotation.




