Tamil Nadu, India
Carbon Vanes Manufacturer in Tiruppur
Carbon vane sets for dry vacuum pumps in Tiruppur plants.

Carbon Vanes Manufacturer in Tiruppur
Vacuum pumps in knitting and finishing sections use carbon vanes, and fitters need a carbon vanes manufacturer in Tiruppur they can reach directly. We cut carbon vanes to length, width and thickness from a sample or dimensions, and pack them as a matched set.
Typical Duty in Tiruppur
Lint reaches pump inlets; filters protect vanes.
Send an old vane and the pump model. Fit vanes with the bevel facing the direction shown by the pump maker, because a reversed vane scrapes instead of sealing. After fitting, run the pump unloaded for a short period so that the new vanes bed in. Where the process gas contains moisture, a short run with dry air before shutdown stops the vanes absorbing water and sticking next morning. Do not oil a dry carbon vane pump; oil swells some carbon grades and clogs the slots, which is the opposite of the dry-running design.
Start an Order in Tiruppur
For Tiruppur, send the old part or its dimensions with the working conditions; supply also covers Coimbatore, Avinashi and Palladam. Also supplied: Carbon Blanks and Carbon Radial Bearings.
Frequently Asked Questions
Lint a problem?
Yes; use inlet filters.
Send Your Requirement
Share the drawing or a sample, the operating medium, temperature, speed and quantity. Our engineers review it and reply with a grade recommendation and a quotation.




